manualshive.com logo in svg

Canon imageRUNNER ADVANCE C3330 Series, Service Manual

Share
Download
Canon imageRUNNER ADVANCE C3330 Series Service Manual Download Page 155

MEAP

 Function Overview

■ Overview of System

MEAP (Multifunctional Embedded Application Platform) is an application platform (execution platform) that allows the user to
execute an application written in the Java language on a Java virtual machine installed on the device.
In this chapter, a device with MEAP is called a device supporting MEAP, and an application which runs on MEAP is called a
MEAP application.
MEAP applications are installed on a MEAP device to provide various functions to the device.

 Login Service and User Authentication Method

A login service is a service for authenticating users when they use a device that supports MEAP. An authentication method of a
login service is called a "user authentication method".
Preinstalled Login Services

Login service

User authentication method

Contents

User Authentication Local Device Authentication

An authentication method that can only be used by users registered in the
database inside the device (enabled at the time of shipment).

Server Authentication and Local De-
vice Authentication

Authentication using an authentication server on a network can be used in
addition to Local Device Authentication.

No Authentication

All functions can be used without authentication, but since all settings can
be used, a security risk is involved.

DepartmentID Au-
thentication

Department ID

Authentication is performed with department ID.

Login service management is performed on the [Enhanced System Application Management] screen of Service Management
Service (hereinafter referred to as "SMS").
Management of user authentication method is performed on the user management screen of each login service.

■ User Authentication (UA)

● Overview

It is a login service that consolidates the existing SSO-H, DA (Default Authentication), and AMS (Access Management System),
and has the following features.

• The following two authentication methods can be selected.

• "Server Authenti Local Device Authentication"
• "Local Device Authentication"

• An Active Directory or LDAP server can be used as the destination server for server authentication.

● PC Environment of Administrator Users and General Users

The environment required for using a device operated with User Authentication from a PC on a network is indicated below.

OS of the PC and Other Environments

Operating System

IPv6

Supported browser

Java Runtime Environment

Windows XP Professional SP3
Windows Vista SP2
Windows 7 SP1
Windows 8
Windows 8.1

Tamura

Internet Explorer 8 or later Java Runtime Environment 7/

Java Runtime Environment 8

Mac OS X Lion
Mac OS X Mountain Lion
Mac OS X Mavericks
Mac OS X Yosemite

 

Safari 5.1 or later

Java Platform Standard Edition 7

2. Technology

143

Summary of Contents for imageRUNNER ADVANCE C3330 Series










































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands