Canon imageRUNNER ADVANCE C3330 Series, Service Manual

Page: 133 / 1225

• 04-0014: Cassette 4 Pickup Retry Error
● Cassette Paper Size Detection/Cassette Detection
Result of automatic
size detection
Paper Size Group for Auto Recognition in Drawer*1
All sizes A/B size Inch size A/K Size
A3 A3 A3 No corresponding size A3
B4 B4 B4 No corresponding size No corresponding size
A4R A4R A4R No corresponding size A4R
A4 A4 A4 No corresponding size A4
B5R B5R B5R No corresponding size No corresponding size
B5 B5 B5 No corresponding size No corresponding size
A5R Depends on the setting*2 A5R STMTR A5R
11 x 17 11 x 17 No corresponding size 11 x 17 No corresponding size
LGL LGL No corresponding size LGL No corresponding size
LTR LTR No corresponding size LTR No corresponding size
LTRR LTRR No corresponding size LTRR No corresponding size
STMTR Depends on the setting*2 A5R STMTR A5R
12 x 18 12 x 18 No corresponding size 12 x 18 No corresponding size
EXEC Depends on the setting*3 No corresponding size EXEC K16
K8 K8 No corresponding size No corresponding size K8
K16 Depends on the setting*3 No corresponding size EXEC K16
K16R K16R No corresponding size No corresponding size K16R
Envelope Blank unless "Paper Settings" is performed due to non-standard size
Custom size
*1: Preferences > Paper Settings > Paper Size Group for Auto Recognition in Drawer
List of Paper Size by Location
Location Default setting
US Inch size
CN A/K Size
Locations other than above A/B size
*2: Preferences > Paper Settings > A5R/STMTR Paper Selection
*3: Configure the setting that supports EXEC/16K (Cassette 1 to 4) in the following service mode (Lv. 2).
Cassette 1: COPIER > OPTION > CST > CST-K-SW
Cassette 2: COPIER > OPTION > CST > C2-K-SW
Cassette 3: COPIER > OPTION > CST > C3-K-SW
Cassette 4: COPIER > OPTION > CST > C4-K-SW
Cassette 1
The Cassette 1 Size Switch detects the size of paper set in the cassette. The switch consists of 3 microswitches, and the width
is detected in accordance with the combination of ON/OFF. When the cassette presence/paper size is changed, the DC Controller
notifies the Main Controller of the status change.
In addition, the distinction between A5-R and STMT-R is determined by the user or service technician while that between EXEC
and K16 is determined by the service technician.
Presence of the cassette is detected when the size switch is pressed. (When none of the switches are pressed, it is judged as
"no cassette".)
NOTE:
When a failure occurred while the cassette of the host machine is being lifted up, the cassette presence/absence and paper size
status are not detected.
2. Technology
121