Canon imageRUNNER ADVANCE C255 Series, Service Manual, Page: 880 / 987

IC Card Reader BOX-D1
Points to Note at Installation
• When installing this equipment, the Card Reader (sales
company's option) is required.
• This equipment cannot be used in combination with IC
Card Reader Attachment-A1.
• When installing at the same time with the Copy Card
Reader, be sure to install this equipment first.
• When installing at the same time with the Finisher, be
sure to install it before installing the Optional Harness
Cover.
• When installing this equipment to the finisher, be sure to
install the IC Card Reader before installing the Optional
Harness Cover of the finisher. As for steps to remove the
Harness Cover, refer to "Removing the Equipment" in
the chapter "Parts Replacement and Cleaning"of
Service Manual for Staple Finisher.
• If the Copy Card Reader is installed, this equipment
cannot be installed unless it is removed. For the removal
procedure, refer to the chapter on "Installation" in the
Service Manual.
• The work to be performed is the same for the printer
model although the illustration of the machine is of a
model with a reader.
CAUTION:
Marked portion
When tightening the screws, do not tighten them too
tightly. Otherwise, there is a risk of damage and
deformation of screw holes.
Installation Outline Drawing
Checking the Contents
■ IC Card Reader BOX
NOTE:
• If the Card Reader Mounting Plate is already
attached, use 6 screws (TP M3x6).
• If the Card Reader Mounting Plate is not attached,
use 10 screws (TP M3x6).
9. Installation
869