manualshive.com logo in svg

Canon imageRUNNER ADVANCE C255 Series, Service Manual, Page: 504 / 987

Share
Download
Canon imageRUNNER ADVANCE C255 Series Service Manual Download Page 504

5. Select the name of the Folder to store and, as necessary, a brief description; then, click [Save].

6. Click [OK].

 SITUATION Mode

Situation mode has been implemented in this machine to improve workability and searchability at the site. This mode makes it
possible to easily use the service mode appropriate for the scene at the site.

The following three points are made available depending on each situation:

1. Display of related service mode that needs adjustment
2. Display of causes and remedies
3. Display of related images

 Function to Mask the Screen during Remote Access

This function ensures security during servicing work using remote connection.
The machine has an option called Remote Operation Viewer for remote control via a network. This option enables a service
technician to perform maintenance on the machine from a remote location.

8. Service Mode

493

Summary of Contents for imageRUNNER ADVANCE C255 Series




























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments