manualshive.com logo in svg

Canon imageRUNNER ADVANCE C2225, Basic Operation Gude

Share
Download
Canon imageRUNNER ADVANCE C2225 Basic Operation Gude Download Page 58

58

1

Display■Print■Settings■Screen

Select■[Print]■from■the■[File]■menu.

From the [File] menu in the application software, click [Print].

The print dialog box is displayed.

2

Display■Properties■Screen■of■Printer■

Driver

Select■the■printer■to■use.

Select the printer to use in [Printer].

Click [Properties].

The properties screen of the printer driver appears.

If you install a printer driver in your computer, you can use the machine to print data created using application software. This section describes 
the flow of basic operations to print data from your computer.

Printing from a Computer

•  Printing methods may differ depending on the applications you are using. For details, see the instruction manuals provided with the 

application software.

•  The screens may differ, depending on the operating system, and the type and version of the printer driver you are using.

Summary of Contents for imageRUNNER ADVANCE C2225





















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands