2
2
2-123
2-123
Process/Operation > MEAP > Starting and Stopping a MEAP Application > Procedure to start and stop a MEAP application
Process/Operation > MEAP > Starting and Stopping a MEAP Application > Procedure to start and stop a MEAP application
3) Check [Resource Information] for information of the whole device resources.
• Amount Used
• Remaining
• Percent Used
Note:
Older iR models show resource information required in each application in List of
Application page (corresponding to MEAP Application Management page of this model).
When checking the resource information of each application in this model, click on the
application name in MEAP Application Management page.
F-2-166
F-2-165
Starting and Stopping a MEAP Application
■
Procedure to start and stop a MEAP application
1) Log in to the SMS. (Refer to "Login to SMS" in this manual.)
2) Click [Application List]. (If the Application List is already being displayed, this operation is
not necessary.)
3) Click [Start] or [Stop] button shown for the MEAP application to be started or stopped.
4) Check to see that the status of the MEAP application in question is either [Started] or
[Stopped.]
F-2-167
F-2-168
