Canon imageRUNNER Advance C2020i Basic Operation Manual Download Page 66

Page: 66 / 160

Feeder (Color Image Reader

Unit-D1)

Originals sent by fax or the Scan and Send function via the feeder, can be stamped to indicate that they have been sent.

Replace the stamp cartridge when the stamp is faint or no longer visible.

When replacing the stamp cartridge, take care not to allow ink to come into contact with your hands or

clothing. If ink gets onto you hands or clothing, wash it off immediately with cold water.

The feeder is an optional product.

Replacing the Stamp Cartridge

Open the feeder covers.

1. Pull the lever, and open the feeder

cover.

2. Open the inner cover, holding it by

its tab.

Summary of Contents for imageRUNNER Advance C2020i

































































































































































Search results

Summary of Contents for imageRUNNER Advance C2020i

Reviews:

Related manuals for imageRUNNER Advance C2020i

Brands by name

Popular brands

Canon imageRUNNER Advance C2020i, Basic Operation Manual

Search results

Summary of Contents for imageRUNNER Advance C2020i

Reviews:

Related manuals for imageRUNNER Advance C2020i

Brands by name

Popular brands