Canon imageRUNNER Advance C2020i Basic Operation Manual Download Page 30

Page: 30 / 160

Press [Scan and Send].

Basic Features screen for [Scan and Send] is displayed.

This section describes the flow of basic scan and send operations.
An optional product is required to use the Send function.

Sending Scanned Documents to an E-Mail, I-Fax, and File Server

Things You Can Do with the Scan and Send Functions

Selecting Function

Select [Scan and Send] from the Main Menu screen.

Placing Originals

Place the original in the feeder or on the platen glass.

Placing originals in the feeder

Adjust the slide guides to fit the size of your originals. Neatly place
your originals with the side to be copied face up.

Placing originals on the platen glass

Open the feeder/platen cover.

Place your originals face down.

Gently close the feeder/platen cover.

If a log in screen for Department ID
Management or SSO-H appears, you must enter
the applicable authentication information (ID,
password/PIN). If the Card Reader-C1/Copy Card
Reader-F1 is installed, first insert a control card.

You can set various send functions. For more
information, see p. 31 to p. 36 in this manual.

Summary of Contents for imageRUNNER Advance C2020i

































































































































































Search results

Summary of Contents for imageRUNNER Advance C2020i

Reviews:

Related manuals for imageRUNNER Advance C2020i

Brands by name

Popular brands

Canon imageRUNNER Advance C2020i, Basic Operation Manual

Search results

Summary of Contents for imageRUNNER Advance C2020i

Reviews:

Related manuals for imageRUNNER Advance C2020i

Brands by name

Popular brands