pg. 58
4) Remove 1 screw [1], reattach the contact holder unit to fit in the emboss[a] properly, and reattach the
same screw[1].
5) Reassemble the parts in the reverse order from the step 3).
6) Make test copy to confirm if an error or an abnormality on image would not occur.
Title
E020-0360 due to the break in the harness for the Registration Patch Sensor when the Main Power is turned
ON
Symptom
E020-0360 occurred when the power was turned ON.
- E020-0360: Low density for the target at patch detection
Cause
The cause was the break in the harness (the portion indicated by [a]) for the Registration Patch Sensor in
the Registration Sensing Assembly [1].
