Home
/
Canon
/
imagerunner advance 8205
/
Operation Manual

Canon imagerunner advance 8205, Operation Manual

Share

Page: 136 / 264

Canon imagerunner advance 8205 Operation Manual Download Page 136

136

Consumables

The following consumables are available from Canon. For more information, contact your local authorized Canon dealer. We
recommend that you order paper stock and toner from your local authorized Canon dealer before your stock runs out.

●

Recommended Paper

In addition to plain paper (11” x 17”, LGL, LTR, and STMT size), recycled paper, color paper, transparencies (recommended
for this machine), tracing paper, labels, and other types of paper stock are available.

Do not store paper in places exposed to open fl ames, as this may cause the paper to ignite, resulting in
burns or a fi re.

• Some commercially available paper types are not suited for this machine. Contact your local authorized Canon dealer when

you need to purchase paper.

• To prevent moisture build-up, tightly wrap any remaining paper in its original package for storage.

For high-quality printouts, use paper recommended by Canon.

●

Toner

If a message prompting you to replace the toner cartridge appears on the touch panel display, replace the used toner
cartridge with a new one.
Only use toner cartridges intended for use with this machine.
For optimum print quality, using Canon genuine toner is recommended.

Product Name

Supported Canon Genuine Toner

imageRUNNER ADVANCE
8205/8295/8285

GPR-37 Black Toner

«
...
134
135
136
137
138
...
»

Summary of Contents for imagerunner advance 8205









































































































































































































































































Reviews:

No comments

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands