Canon imageRUNNER ADVANCE 6255i, User Manual

Page: 64 / 394

62 Routine Maintenance 3
When an Error Message/Error Code Is Displayed
When an Error Message Is
Displayed
Error messages may appear on the touch panel display
of the machine or the Web browser.
Self-diagnostic error messages appear in the following
cases:
● When scanning or printing cannot be
performed because of an operational error
● When you need to make a decision or take
some action during scanning or printing
● When you need to make a decision or take
some action while browsing the network
Example of an Error Message on the Touch Panel Display
Example of an Error Message on the Web Browser
For information on error messages and instructions on
resolving errors, see e-Manual > Problem Solving.
When an Error Code Is Displayed
If a job or operation does not complete successfully, the
error code is displayed on the Details screen for Log on
the Status Monitor/Cancel screen.
You can check the error code in the following locations:
● Details screen for Log on the Status
Monitor/Cancel screen:
When a job or operation is not completed normally:
● Results row of the Communication
Management Report:
If an error occurs during a send, receive, or fax job, the
error code is printed.
iRADV5255
04/12/2012
START TIME END TIME TYPE
DELIVER DEPT.ID
ADDRESS BOOK
DEPT.ID
ADDRESS BOOK
DEPT.ID
ADDRESS BOOK
DEPT.ID
ADDRESS BOOK
DELIVER
DELIVER
DELIVER
TO/FROM DATA DETAILS RESULT
DEVICE INFORMATION COMMUNICATION LOG REPORT
For information on error codes and instructions on
resolving errors, see e-Manual > Problem Solving.