manualshive.com logo in svg

Canon imageRunner Advance 6255, Basic Operation Gude, Page: 124 / 214

Share
Download
Canon imageRunner Advance 6255 Basic Operation Gude Download Page 124

124

2

Remove any jammed paper from the upper right cover.

1  Remove any jammed paper.
2  Close the upper right cover.

When closing the cover, be careful not to get your fi ngers caught, as this may result in personal 
injury.

When the Paper Deck Unit-A1/Paper Deck Unit-D1 is attached, reconnect the Paper Deck Unit-A1/Paper 
Deck Unit-D1 to the main unit.

3

Follow the instructions on the screen.

The screen indicating the directions on how to clear the paper jam is displayed repeatedly until the paper 
jam is cleared.

  

   Paper Drawers 3 and 4 

1

Remove any paper jammed in the paper drawer.

1  Press the open button of the 

paper drawer that is feeding 
the paper.

2  Grip the handle, and pull 

out the paper drawer until it 
stops.

3  Remove any jammed paper.

Summary of Contents for imageRunner Advance 6255























































































































































































































Reviews:

No comments