Canon imageRUNNER ADVANCE 6075 Series, Service Manual

Page: 437 / 1406

4
4
4-116
4-116
Parts Replacement and Clearning > Image Formation System > Cleaning the Process Unit
Parts Replacement and Clearning > Image Formation System > Cleaning the Process Unit
Cleaning the Process Unit
<Preparation>
1. Open the Inner Cover. (Refer to “Removing the Primary Charging Assembly”)
2. Remove the Primary Charging Assembly. (Refer to page 4-97)
3. Remove the Pre-transfer Charging Assembly. (Refer to page 4-108)
4. Remove the Process Unit. (Refer to page 4-114)
5. Remove the Drum Cleaning Unit. (Refer to “Removing the Drum Cleaning Blade”)
6. Remove the Drum Unit. (Refer to page 4-121)
<Procedure>
1) Clean the Separation Claw Mounting Base and Separation Claw with lint-free paper
moistened with alcohol.
F-4-138
2) Clean the rear side of the Process Unit with lint-free paper moistened with alcohol.
F-4-139