Canon imageRUNNER ADVANCE 6075 Series, Service Manual

Page: 300 / 1406

2
2
2-246
2-246
Technology > Updater > Network Settings > Confirming URL Setting of Distribution Server
Technology > Updater > Network Settings > Confirming URL Setting of Distribution Server
Network Settings
■ Connecting to External Network
The method of connecting to external network is similar to a normal network connection
method. Refer to user manual of the device for details.
NOTE:
• See User Manual for how to connect the device to the external network.
• Before using UGW link or User mode, see the sections below to prepare as required.
"Enabling UGW Link"
"Enabling [Update Firmware] Button of User Mode"
"Enabling [Install Application/Options] Button of User Mode"
NOTE:
“External Network” here means the network connecting the device to CDS via Internet.
■
Confirming URL Setting of Distribution Server
This section describes how to confirm the URL setting of the distribution server.
1. Start [Service Mode] at Level 1.
1). Press [Setting/Registration (User Mode)] button on the control panel.
2). Press [2] and [8] buttons at a time on the control panel.
3). Press [Setting/Registration (User Mode)] button on the control panel.
4). [Service Mode] screen is shown.
2. Press [Updater] button.
F-2-359