manualshive.com logo in svg

Canon imageRUNNER ADVANCE 6065, User Manual, Page: 114 / 276

Share
Download
Canon imageRUNNER ADVANCE 6065 User Manual Download Page 114

Making Copies in the 

V

oice Na

vigation Mode

1

2

Basic Copy Settings

2-62

5

Press  

(Start).

Copying starts.

NOTE

•

To return the copy ratio to 100%, move 
the focus to [Direct(100%)]/[1:1(100%)] 

➞

 press 

 (Select).

•

To cancel all settings and return the 
machine to the Standard mode, press 

 (Reset).

Zoom by Percentage

You can reduce or enlarge originals by any 
copy ratio in 1% increments. The available 
copy ratios are from 25% to 400%. The same 
copy ratio is used for the horizontal (X) and 
vertical (Y) axes.

Set the zoom ratio in 1% increments with the 
following procedure.

1

Place your originals.

NOTE
For instructions on placing originals, see 
"Placing Originals," on p. 2-20.

Summary of Contents for imageRUNNER ADVANCE 6065





















































































































































































































































































Reviews:

No comments