Canon imageRUNNER ADVANCE 6055, Maintenance Manual

Page: 48 / 134

Routine Cleaning (Main Unit) 1-36
1
Routine Maintenance
Routine Cleaning (Main Unit)
If the touch panel display becomes dirty and the screen may not be seen clearly, clean the touch panel display. Since the touch
panel display becomes dirty from normal use, we recommend that you clean it once a week or every 10 days.
If the original is not copied clearly, clean the following parts of the machine. For high-quality printouts, we recommend cleaning
these parts once or twice a month.
•
Platen Glass/Underside of the Feeder (optional)
•
Feeder’s rollers (optional)
If streaks appear on printed output or the printed image become light or distorted, perform the following cleaning as necessary.
•
Automatic Feeder Cleaning
•
Wire Cleaning
•
Drum Cleaning
•
When cleaning the machine, first turn OFF the main power switch, and disconnect the power cord. Failure to observe these steps
may result in a fire or electrical shock.
•
Do not use alcohol, benzene, paint thinner, or other solvents for cleaning. Doing so may result in damage to the plastic parts.
•
Disconnect the power cord from the power outlet regularly, and clean the area around the base of the power plug’s metal pins and
the power outlet with a dry cloth to ensure that all dust and grime is removed. If the power cord is connected for a long period
of time in a damp, dusty, or smoky location, dust can build up around the power plug and become damp. This may cause a short
circuit and result in a fire.
The following procedures are necessary only if the Feeder ( Duplex Color Image Reader Unit) is attached.
- Cleaning the Platen Glass/Underside of the Feeder
- Manual Feeder Cleaning
- Automatic Feeder Cleaning