Canon imageRUNNER ADVANCE 6055 Series, Service Manual

Page: 302 / 1406

2
2
2-248
2-248
Technology > Updater > Network Settings > Communication Test
Technology > Updater > Network Settings > Communication Test
■
Communication Test
This section describes how to check if the communication is normally done to the distribution
server and/or the file server.
NOTE:
CDS and RDS are another servers.You need the communication test of CDS by all
means even if You succeed in a communication test of the Embedded RDS.
1. Start [Service Mode] at Level 1.
1). Press [Setting/Registration (User Mode)] button on the control panel.
2). Press [2] and [8] buttons at a time on the control panel.
3). Press [Setting/Registration (User Mode)] button on the control panel.
4). [Service Mode] screen is shown.
2. Press [Updater] button.
F-2-363
3. Press [Software Management Settings] button.
4. Press [Test Communication] button.
F-2-364
F-2-365