manualshive.com logo in svg

Canon imagerunner advance 4525, Faq Manual, Page: 11 / 44

Share
Download
Canon imagerunner advance 4525 Faq Manual Download Page 11

Lo

ad

in

g E
nv

elo

pe

s

11

Loading Envelopes

CAUTION!

•  You can load envelopes in the paper drawer 2 or multi-purpose tray.
•  Do not use envelopes that have glue attached to their flaps, as the glue may melt due to the heat and pressure of 

the fixing unit.

•  Do not print on the reverse side of the envelopes (the side with the glued areas).
•  For the paper drawer 2, load envelopes the front side face up, and for the multi-purpose tray, load them the front 

side face down. For the loading orientation, see the table below.

Paper Drawer 2

Multi-Purpose Tray

ISO-C5

Monarch

COM10 No.10

DL

Paper Drawer 2

Multi-Purpose Tray

Yougatanaga 3

Nagagata 3

Kakugata 2

Preparation before Loading Envelopes

1

  Take five or so pieces of envelopes, fan them well 

to eliminate curls, and level the stack flat.

Press the stack along 

the four side edges.

2

  To prevent the sealing edge of the seal flap from 

floating from the body of the envelope, press the 
envelope in the four corners and expel the air.

Summary of Contents for imagerunner advance 4525













































Reviews:

No comments