Canon imageRUNNER 6570 Reference Manual Download Page 399

Page: 399 / 600

Specifying Device Information Delivery Settings

7-91

ana

ger

Set

ngs

NOTE

•

You can cancel a selection by selecting the destination again.

•

To cancel all destinations, press [Clear Selection]. ([Clear Selection] changes to
[Select All].)

Press [Done] repeatedly until the Basic Features screen
appears.

Setting Manual Delivery

You can set to manually deliver device information.

IMPORTANT

When delivering device information, the following machines will not update their
information:

- Machines which are processing a send job

- Machines importing or exporting data via the Remote UI

- Machines which are executing functions from the Additional Functions screen

- Machines which are having their address books accessed

Press

(Additional

Functions)

➞

[System Settings].

If necessary, see the screen shot in step 1 of "Specifying the System Manager
Settings," on p. 7-3.

If the System Manager ID and System Password have been set, enter the System
Manager ID and System Password using

(numeric keys)

➞

press

(ID).

Press [

▼

] or [

▲

] until [Device Information Delivery Settings]

appears

➞

press [Device Information Delivery Settings].

If necessary, see the screen shot in step 2 of "Registering Delivery Destinations,"
on p. 7-74.

Summary of Contents for imageRUNNER 6570

























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for imageRUNNER 6570

Reviews:

Brands by name

Popular brands

Canon imageRUNNER 6570, Reference Manual

Search results

Summary of Contents for imageRUNNER 6570

Reviews:

Brands by name

Popular brands