Canon imageRUNNER 6570 Reference Manual Download Page 390

Page: 390 / 600

Specifying Device Information Delivery Settings

7-82

ana

ger

Set

ngs

Deleting a Delivery Destination

Press

(Additional

Functions)

➞

[System Settings].

If necessary, see the screen shot in step 1 of "Specifying the System Manager
Settings," on p. 7-3.

If the System Manager ID and System Password have been set, enter the System
Manager ID and System Password using

(numeric keys)

➞

press

(ID).

Press [

▼

] or [

▲

] until [Device Information Delivery Settings]

appears

➞

press [Device Information Delivery Settings].

If necessary, see the screen shot in step 2 of "Registering Delivery Destinations,"
on p. 7-74.

Press [Register Destinations] under <Transmitting Settings>.

If necessary, see the screen shot in step 3 of "Registering Delivery Destinations,"
on p. 7-74.

Select the destination that you want to erase

➞

press [Erase].

If the desired destination is not displayed, press [

▼

] or [

▲

] to scroll to the desired

destination.

To select all of the destinations, press [Select All]. However, if a destination is
selected, this key changes to [Clear Selection].

NOTE

•

You can cancel a selection by selecting the destination again.

•

To cancel all destinations, press [Clear Selection]. ([Clear Selection] changes to
[Select All].)

Summary of Contents for imageRUNNER 6570

























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for imageRUNNER 6570

Reviews:

Brands by name

Popular brands

Canon imageRUNNER 6570, Reference Manual

Search results

Summary of Contents for imageRUNNER 6570

Reviews:

Brands by name

Popular brands