manualshive.com logo in svg

Canon imageRUNNER 6020 Series, Reference Manual Reference Manual

Share
Download
Canon imageRUNNER 6020 Series Reference Manual Reference Manual Download Page 472

Card Reader-C1

7-50

Optional Equipment

7

Department ID Management When Using 
the Card Reader-C1

This section explains how to use Department ID Management, and how to check 
the print totals when the control card is being used.

NOTE

The maximum number of digits you can store for a password is seven. If you store them 
with less than seven digits, the machine stores them as follows:
- Example: If <321> is entered 

➞

 <0000321> is stored

Changing the Password and Impression Limit

You can change the password and impression limit of the stored Department ID.

1

Press

(Additional Functions) 

➞

 [System Settings] 

➞

 [Dept. 

ID Management].

If a System Manager ID/Password is set, press [System Settings] 

➞

 enter the 

System Manager ID and System Password 

➞

 press

(ID).

NOTE

If the desired setting is not displayed, press [

▼

] or [

▲

] to scroll to the desired 

setting.

2

Press [Store Dept. ID/Password].

ID

Summary of Contents for imageRUNNER 6020 Series













































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands