manualshive.com logo in svg

Canon imageRUNNER 6020 Series, Reference Manual Reference Manual

Share
Download
Canon imageRUNNER 6020 Series Reference Manual Reference Manual Download Page 352

Adding Toner

5-12

Routine Maintenance

5

Adding Toner

When there is only a small amount of toner remaining, the message below appears 
on the touch panel display. Prints can still be made, but at this time, you should 
purchase new toner so that you have it on hand when it is needed.

When the toner has run out and prints can no longer be made, a message 
describing how to add toner appears on the touch panel display. Add toner by 
following the described procedure.

CAUTION

Never dispose of the finished toner in a fire or incinerator. This may result in an 
explosion.

Summary of Contents for imageRUNNER 6020 Series













































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands