Canon imageRUNNER 5075, Manual

Page: 185 / 250

If Trouble Occurs When Downloading Fonts or Macros from a Personal Computer
6-17
6
Tro
uble
shootin
g
If Trouble Occurs When Downloading Fonts or
Macros from a Personal Computer
If trouble occurs when fonts or macros are downloaded from a personal computer
to this machine and the problem cannot be resolved by reinstalling, follow the steps
explained in this section to initialize the hard disk partition.
IMPORTANT
š
Only the system administrator for the machine can initialize the hard disk. Contact the
system administrator to execute this procedure.
š
The font or macros information downloaded to the hard disk is deleted by initializing the
hard disk.
š
Do not turn OFF the power when the hard disk is initializing. Doing so may damage the
machine.
NOTE
š The hard disk cannot be initialized in the following conditions:
- When print data is being received or printed. (It is recommended that you remove the
cable connecting the machine to the hub, so it does not receive print data.)
- When fonts are being installed or uninstalled.
š The steps explained below are for initializing the PCL Hard Disk partition.
š To initialize the PS Hard Disk partition, follow the same steps, except that for step 5,
select [Initialize PS Hard Disk].
1
Set System Management Mode.
NOTE
Before setting System Management Mode, a system manager ID and system
password must be set. For details on settings, see Chapter 6, "System Manager
Settings," in the
Reference Guide .