Canon imageRUNNER 5075, Manual

Page: 155 / 250

Printing Directly from the Remote UI
5-21
5
Ho
w
to Use the Direct
Pri
nt F
unction
[Finishing] * This setting specifies whether to print in pages or copies.
š
If [Off] is selected, all copies of the same page are printed
before the next page is printed.
š
If [Collate (Page order)] is selected, all pages of each copy
are printed before the next copy is printed.
š
If [Group (Same pages)] is selected, all copies of the same
page are printed before the next page is printed.
š
If [Staple] is selected, all pages of each copy (collating) are
printed and stapled.
[Offset]
*
š
If the checkbox and [Collate (Page order)] are selected in
[Finishing], all pages of each copy (collating) are printed, and
every other complete copy is offset to indicate where each
copy starts.
š
If the checkbox and [Group (Same pages)] are selected in
[Finishing], all copies of the same page are printed before
printing the next page. Every other complete set of pages is
offset to indicate where each new set starts.
[Rotate]
*
š
If the checkbox and [Collate (Page order)] are selected in
[Finishing], all pages of each copy (collating) are printed, and
rotates every other complete copy 90 degrees to indicate
where each copy starts.
š
If the checkbox and [Group (Same pages)] are selected in
[Finishing], all copies of the same page are printed before
printing the next page. It rotates every other complete set of
pages 90 degrees to indicate where each new set starts.
[Hole Punch]
* This setting allows you to punch holes in the printed-paper.
Select the checkbox and one of either [Left], [Right], [Top], or
[Bottom].
If you select both the staple and punch settings, specify the
punch and staple settings so the positions match. If the
positions do not match (for example, the staple position is on
the right and the punch position is on the left), both settings are
void and the paper is printed without either stapling or
punching.
[Staple Position] * This setting specifies the staple position if [Staple] is selected
in [Finishing].
š
If [Corner] is selected, you can select one of either [Top Left],
[Top Right], [Bottom Left], or [Bottom Right].
š
If [Double] is selected, you can select one of either [Left],
[Right], [Top], or [Bottom].
[Store In User
Inbox] To store the data in a user box, select [Store In User Inbox] and
then select the destination user box.
[Document Name
after Storing] To store the data in a user box, you can specify the document
name.
The document name cannot exceed 24 characters.