Canon imageRUNNER 5055 series, Service Manual

Page: 80 / 596

Chapter 2
2-24
F-2-87
2.7 Installing the Reader Heater
2.7.1 Checking the Contents
0015-7877
iR5065 / iR 5055 / iR5075 / / /
<Reader Heater Kit>
F-2-88
T-2-5
2.7.2 Power off of the host machine
0015-7815
iR5065 / iR 5055 / iR5075 / / /
2.7.3 Installation Procedure
0015-7814
iR5065 / iR 5055 / iR5075 / / /
1) Open the DADF.
2) Remove the glass retainer [1].
- Remove the 2 screws [2]
3) Remove the copyboard glass [3]
If it is hard to hook the document tray, loosen the 2 stepped screws and
hook it once again.
[1] Mirror Heater FK2-0229 1pc
[2] Lens Heater FK2-0228 1pc
[3] Cable Clamp WT2-0507 2pc
[4] Heater Harness Retainer FC5-2945 1pc
[5] Screw (RS tightening; M4X8) XB3-6400 4pc
How to turn off the main power
When turn off the main power, implement the following steps to protect
the hard disk of this product.
1) Push the control panel power switch for 3 sec or more.
2) Operate the touch panel following the instruction on the screen of
shutdown sequence in order to be ready to turn off the main power switch.
3) Turn off the main power switch.
4) Pull out the power cable (for the outlet).
[1]
[1] [3] [5] [2] [4]