manualshive.com logo in svg

Canon ImageRunner 5020 Series, Reference Manual Reference Manual

Share
Download
Canon ImageRunner 5020 Series Reference Manual Reference Manual Download Page 77

Entering Characters from the Touch Panel Display

1-45

Bef

ore 

Y

ou Star

t Using 

This Machine

1

Entering Special Characters

Example: Enter <é>.

NOTE

If Language Switch is set to ‘On’, some characters may be restricted, and cannot be 
entered.

1

Press the entry mode drop-down list 

➞

 select [Symbol].

2

Press [

▼

] or [

▲

] to display the desired special character.

3

Press [é].

To enter a space, press [Space].

To move the cursor, press [

] or [

]. 

To enter alphanumeric characters, press the entry mode drop-down list 

➞

 select 

[Alphanum.] 

➞

 enter the characters.

Summary of Contents for ImageRunner 5020 Series













































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands