manualshive.com logo in svg

Canon ImageRunner 5020 Series, Reference Manual Reference Manual

Share
Download
Canon ImageRunner 5020 Series Reference Manual Reference Manual Download Page 465

Copy Tray-C3

7-43

Optional Equipment

7

Copy Tray-C3

The Copy Tray-C3 is equipped with the following functions:

■

Collate Function

This function automatically collates papers into sets arranged in page order, and outputs 
them.

■

Group Function

This function outputs all prints of the same page in one group.

■

Rotate Function

This function collates paper of the same size, and outputs the copy sets in alternating 
directions.

IMPORTANT

The paper sizes that can be selected when you set the Rotate function are LTR and 
LTRR.

Parts and Their Functions

a

a

a

a

Copy tray

Paper is output here.

1

Summary of Contents for ImageRunner 5020 Series













































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands