Canon ImageRunner 5000 Series, User Manual

Page: 89 / 523

2
Basic Cop
ying
Changing the Copy Ratio (Copy Ratio) 2-20
Automatically Setting the Copy Ratio Based on the Original
and Copy Paper Sizes (Auto)
The machine automatically selects the appropriate copy ratio based on the size of the originals and
the selected paper.
The available copy ratios are from 25% to 400% when the original is placed on the platen glass, and
from 25% to 200% when the original is placed in the feeder.
IMPORTANT
• You cannot use the Auto mode with Automatic Paper Selection.
• You cannot copy highly transparent originals, such as transparencies, in the Auto mode. Use the Preset
Zoom or Zoom Designation modes.
• To use the Auto mode, your originals must conform to a standard paper size.
NOTE
• If an error occurs between the Auto copy ratio and the actual copy size, you can adjust this with the Zoom
Fine Adjustment function. (See “Fine-adjusting Zoom When Differences in Original Image and Print
Image Occur,” on p. 6-31.)
• The paper sizes that can be used with Auto are 11"x17"/ LGL/ LTR/ LTRR/ STMT/ STMTR. However,
when copying STMT-size original using the platen glass, you need to set the “LTRR/STMT Original
Selection” in the Additional Functions. (See “Distinguishing LTRR-Size and STMT-Size Originals,” on
p. 6-16.)
1
Place your originals and press the [Paper
Select] key.
Auto
Copy Original
E82_US.book Page 20 Tuesday, May 22, 2001 12:11 AM