manualshive.com logo in svg

Canon ImageRunner 5000 Series, User Manual

Share
Download
Canon ImageRunner 5000 Series User Manual Download Page 87

2

Basic Cop

ying

Changing the Copy Ratio (Copy Ratio)

2-18

6

Proceed to make copies in the usual way.

NOTE

• To return the copy ratio to 100%, press the [Direct] key.
• You can cancel the mode by pressing the 

 key. (The machine returns to the Standard mode.)

Specifying the Copy Ratio by % (Zoom Designation)

You can reduce or enlarge images by any copy ratio, in 1% increments. 
The available copy ratios are from 25% to 400% when the original is placed on the platen glass, and 
from 25% to 200% when the original is placed in the feeder.

1

Place your originals and press the [Copy 
Ratio] key. 

2

Enter the copy ratio with the [–] or [+] key or 
the Numeric keys (

-

) in 1% increments.

NOTE

• Even if you entered the ratio with the Numeric keys 

(

-

), you can change the entered values with 

the [–] and [+] keys.

• If you make a mistake when entering values, press 

the

key, and enter the correct value.

Reset

Zoom Designation

CITY

CITY

CITY

CITY

CITY

Copy

Original

0

9

0

9

C

Clear

E82_US.book  Page 18  Tuesday, May 22, 2001  12:11 AM

Summary of Contents for ImageRunner 5000 Series












































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands