manualshive.com logo in svg

Canon ImageRunner 5000 Series, User Manual

Share
Download
Canon ImageRunner 5000 Series User Manual Download Page 31

30

Installation Precautions

Select a Safe Power Supply

• Plug the machine into a 120V AC outlet.
• Do not plug other electrical equipment into 

the outlet to which the machine is con-
nected.

• Do not plug the machine into a multi-plug 

power strip. Doing so might cause a fire.

• The power cable may become damaged if it 

is often stepped on or heavy objects are 
placed on it. Continued use of a damaged 
power cable can lead to an accident.

Provide Adequate Installation Space

• Provide enough space on each side of the 

machine for unrestricted operation.

Moving the Machine

• If you intend to move the machine, contact 

your service representative beforehand.

■ 

When the Paper Deck-G1, the Saddle Finisher-F2, 
and the Puncher Unit-B1 are attached.
(Each option in extended condition)

■ 

When the Copy Tray-C3 is 
attached.

29-1/4" (743 mm)

49" (1,244 mm)

52-5/8" (1,335

 

mm)

29-1/4" (743 mm)

49" (1,244 mm)

85-1/8" (2,162

 

mm)

more than 2-3/8" (60 mm)

more than 2-3/8" (60 mm)

E82_US.book  Page 30  Tuesday, May 22, 2001  12:11 AM

Summary of Contents for ImageRunner 5000 Series












































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands