manualshive.com logo in svg

Canon ImageRunner 5000 Series, User Manual

Share
Download
Canon ImageRunner 5000 Series User Manual Download Page 19

18

Safety Considerations

• Do not install the machine in the following loca-

tions.
- A damp or dusty location
- A location which is exposed to direct sunlight
- A location subject to high temperatures
- A location that is subject to open flames

• Do not remove the machine’s fixing stoppers 

after the machine has been installed, as this may 
cause the machine to fall or tip over, resulting in 
personal injury.

Power Supply

WARNING

• Do not damage or modify the power cord. Also, 

do not place heavy objects on the power cord, or 
pull on or excessively bend it, as this could 
cause electrical damage and result in a fire or 
electrical shock.

• Do not insert or unplug the power plug with wet 

hands, as this may result in electrical shock.

E82_US.book  Page 18  Tuesday, May 22, 2001  12:11 AM

Summary of Contents for ImageRunner 5000 Series












































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands