Canon ImageRunner 5000 Series User Manual Download

Page: 109 / 523

Basic Cop

ying

Two-sided Copying (Two-sided Mode)

2-40

The display returns to the Basic Features screen,
and “1 2-Sided” is displayed above the [Two-sided
Mode] key.

Proceed to make copies in the usual way.

NOTE

• When the original is placed on the platen glass, follow the instructions that appear on the screen and

press the

key once for each original. When scanning is completed, press the [Done] key.

• To cancel the setting, press the [Two-sided Mode] and [Cancel] keys in that order.
• You can also cancel the mode by pressing the

key. (The machine returns to the Standard mode.)

Making Two-sided Copies from Two-sided Originals (2 2-
Sided)

This feature automatically turns over two-sided originals placed in the feeder to make two-sided
copies.

Start

Reset

22-Sided

Original

Copy

E82_US.book Page 40 Tuesday, May 22, 2001 12:11 AM

Summary of Contents for ImageRunner 5000 Series












































































































































































































































































































































































































































































































































Search results

Summary of Contents for ImageRunner 5000 Series

Reviews:

Related manuals for ImageRunner 5000 Series

Brands by name

Popular brands

Canon ImageRunner 5000 Series, User Manual

Search results

Summary of Contents for ImageRunner 5000 Series

Reviews:

Related manuals for ImageRunner 5000 Series

Brands by name

Popular brands