manualshive.com logo in svg

Canon ImageRunner 4051, Basic Operation Manual

Share
Download
Canon ImageRunner 4051 Basic Operation Manual Download Page 27

27

Flo

w

■of

■B

asic
■O

per
ations

5

4

1

2

3

9

8

7

6

[Options]■3/3

How to Make a Copy

1

[Print■&■Check]

This mode enables you to confirm scanned images page by 
page before copying when you scan originals on the platen 
glass.

2

[Nega/Posi]

This mode enables you to copy the original image with the 
hues and gradations inverted.

3

[Repeat■Images]

This mode enables you to repeatedly copy the entire original 
image in either the vertical or horizontal direction.

4

[Merge■Job■Blocks]

This mode enables you to scan multiple batches of originals 
with different copy settings and copy them as one document.

5

[Cascade■Copy]

This mode enables you to print copies from the machine and 
a cascade copy printer.

6

[Superimpose■Image]

This mode superimposes an image (image form) previously 
scanned, registers it in the memory of the machine, and then 
places it on the image of the original.

7

[Store■in■Mail■Box]

You can store the scanned originals in the User Inbox. The 
specified copy mode is also stored.

8

[Job■Done■Notice]

Press to have the machine notify the user through e-mail 
when the copy job is done.

9

[Mirror■Image]

This mode enables you to copy the original image reversed, as 
if it were a reflection in a mirror.

Summary of Contents for ImageRunner 4051





















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands