Canon ImageRunner 4025 Basic Operation Manual Download Page 56

Page: 56 / 180

Display■Print■Settings■Screen

Select■[Print]■from■the■[File]■menu.

From the [File] menu in the application software, click [Print].

The print dialog box is displayed.

Display■Properties■Screen■of■Printer■

Driver

Select■the■printer■to■use.

Select the printer to use in [Printer].

Click [Properties].

The properties screen of the printer driver appears.

If you install a printer driver in your computer, you can use the machine to print data created using application software. This section describes
the flow of basic operations to print data from your computer.

Printing from a Computer

• Printing methods may differ depending on the applications you are using. For details, see the instruction manuals provided with the

application software.

• The screens may differ, depending on the operating system, and the type and version of the printer driver you are using.

Summary of Contents for ImageRunner 4025





















































































































































































Search results

Summary of Contents for ImageRunner 4025

Reviews:

Canon ImageRunner 4025, Basic Operation Manual, Page: 56 / 180

Search results

Summary of Contents for ImageRunner 4025

Reviews: