manualshive.com logo in svg

Canon ImageRunner 4025, Basic Operation Manual, Page: 18 / 180

Share
Download
Canon ImageRunner 4025 Basic Operation Manual Download Page 18

18

 

●

Specifying the Main Menu Settings

You can set the number of buttons and the layout displayed on the Main Menu screen.

1. Press 

→

 [Main Menu Button Display Settings].

2. Press   or   to select the number of buttons and the layout to be displayed.
3. Select the function that appears on the list 

→

 change the order in which it is displayed.

4. Press [OK].

Example of Customized Screen

 

●

Top Buttons Settings

You can display up to two function shortcut buttons on the top of the screen.

1. Press 

→

 [Top Buttons Settings].

2. Select the shortcut button and the function to assign to it.
3. Press [OK].

Example of Registration

Main Menu Screen Settings

•  Select the function that appears on the list and press [Up] or [Down] to change the order 

in which it is displayed.

•  You can place or delete one blank button space by pressing [Add Blank] or [Delete Blank], 

respectively.

You can specify settings for the displayed screen by pressing 

 on the top right of the screen. To perform this procedure, log in to the machine 

as an administrator.

•  The items displayed when 

 is pressed may differ, depending on the function.

•  If authentication function is used, items displayed may differ or 

 may not be 

available, depending on the login user’s privileges.

If you do not want to select a function, press [Unassigned].

Summary of Contents for ImageRunner 4025





















































































































































































Reviews:

No comments