Canon ImageRunner 4025 Basic Operation Manual Download Page 148

Page: 148 / 180

148

Question

Applicable■Page

I want to make a rush copy, but I cannot because of the long copy job.

p. 150

When copying, the Scan screen for the next document is displayed. Is there a way to not display this screen?

p. 150

Can a mark be applied to the document that has been scanned?

p. 151

Do I need to enter the address of the recipient every time?

p. 151

Can I send a fax to multiple destinations?

p. 152

Can you give me information on how to send to the SMB server and specify its settings?

p. 153

Can I move the Address Book registered on another Canon machine onto this machine?

p. 154

Can I forward the data received via fax/I-fax?

p. 154

When sending a fax, can the machine be set so that the sender’s fax number and name be displayed?

p. 155

Q10

How do I change the default settings (scan settings and file format) of the Scan and Send Basic Features screen?

p. 156

Q11

Is there a way to prevent a transmission error when sending a facsimile to a new destination?

p. 156

Q12

The quality of the image sent by fax is not good.

p. 157

Q13

How can I make use of multiple telephone lines?

p. 158

Q14

How do I register/edit destinations in a one-touch button?

p. 158

Q15

Can I add an arbitrary subject when sending e-mail?

p. 159

Q16

How do I change the storage period for the scanned file stored in the Mail Box?

p. 159

Q17

How do I access the Advanced Box from a computer?

p. 160

Q18

How do I forward received data to the Advanced Box?

p. 160

Q19

How do I set to create a booklet with a file in a mail box?

p. 161

Q20

I cannot print PDF files. Are optional products required?

p. 162

Q21

When printing from the computer, booklet was not made even though saddle stitch booklet mode was set.

p. 162

Q22

The content of the reverse side appears on the copies.

p. 162

Q23

The printed paper appears dirty. Also, the color appears to be different from the original.

p. 163

Q24

The printed paper is warped.

p. 163

Q25

I had printed from the computer, but I did not find the output. I am afraid that someone may have taken it by mistake.

p. 164

Q26

Can I specify the scan settings from the computer and then store for the original loaded in the machine?

p. 164

Q27

Can I make copies or send a facsimile of different size originals at the same time?

p. 165

Q28

Can I print on the reverse side of the preprinted paper?

p. 165

Frequently Asked Questions

This section includes frequently asked questions and answers regarding the machine. Use this section if you have trouble using the
machine.

Summary of Contents for ImageRunner 4025





















































































































































































Search results

Summary of Contents for ImageRunner 4025

Reviews:

Canon ImageRunner 4025, Basic Operation Manual, Page: 148 / 180

Search results

Summary of Contents for ImageRunner 4025

Reviews: