Canon ImageRunner 4025, Basic Operation Manual, Page: 136 / 180

136
8
Close the front cover of the finisher .
When you have cleared the staple jam, be sure to manually reposition the staples in the saddle stitcher unit.
(See e-Manual > Settings/Registration.)
Inner Finisher-D1
Check the location of the staple jam, and follow the procedure described below, while referring to the directions that
appear on the touch panel display, to remove the jammed staples.
Make sure to close all covers and paper drawers of the machine before clearing any staple jams.
The Inner Finisher-D1 is an optional product.
1
Remove any jammed paper protruding from the output tray .
2
Pull out the staple case .
1
2
1.■ Open■the■front■cover■of■the■
finisher.
2.■ Pull■out■the■staple■case,■
holding■it■by■the■green■tab.
When closing the cover, be careful not to get your fingers caught, as this may result in personal
injury .