Canon imageRUNNER 2830, Facsimile Manual, Page: 80 / 352

Sending Methods 2-8
2
Basic Send
and Receiv
e Methods
During transmission, the transaction number, destination's telephone number, and
page number currently being sent, are displayed in the Job Monitor area.
NOTE
•
To cancel scanning, press [Cancel] on the touch panel display or (Stop) on the
control panel.
•
The available memory is displayed in the lower right corner of the screen.
•
The transaction number is used for reference when checking the transmission
results, changing the destination, or canceling the fax job. (See "Checking/
Changing the Status of Fax Jobs," on p. 4-2.)
•
If there is no response from the recipient's machine or if a transmission error
occurs, the machine automatically redials the number and attempts to send the
document again. Automatic redialing is carried out twice, at two minute intervals.
(See "Auto Redial," on p. 5-45.)
•
If you cannot send the document after redialing, check the destination's telephone
number. Replace the original, and try sending the document again.
Direct Sending
Direct Sending enables you to send your document directly to the recipient without
storing it in memory. The machine sends each page of the document to the
destination as it is scanned.
Although Direct Sending is slower than Memory Sending, you can use Direct
Sending when you need to send an urgent document ahead of other documents
stored in memory.