Setup Procedure
1-20
Be
fo
re
Y
o
u S
tar
t
1
Setting up the Machine for Printing/Sending Faxes from a
Computer
Follow the setup procedure described here to set up the machine for printing and
sending faxes from a computer.
IMPORTANT
•
Sending faxes from a computer is available only when the optional Super G3 Fax
Board-AG1 is attached to the machine.
•
If you are printing from a computer over a TCP/IP network, you can use the following
application protocols:
- LPD
- Raw (Windows 2000/XP/Vista/7/Server 2003/Server 2008 only)
- WSD (Windows Vista/7/Server 2008 only)
NOTE
For details about system requirements, see “Printing or Sending a Fax from a
Computer,” on p. 1-14.
5
IP Addre
ss
S
ettin
gs
Specify the machine’s network address and establish a connection to a computer on your network. Any of
the following can be used to specify the settings:
•
The machine’s control panel (Additional Functions menu)
•
The Remote UI (via a web browser)
1
Connect the machine to a computer
•
Connection via a network
Follow the procedure described in “Connecting the Machine to a Network,” on p. 1-19.
•
Connection via a USB cable*
Follow the procedure described in Chapter 1, “Machine Installation,” in the
User’s Guide
.
* In this case, proceed to step 3.
2
S
et up the machine accordin
g
to your network environment (
S
ee Chapter 3,
up the Machine for Your Network Environment.”)
Any of the following can be used to specify the settings:
•
The Machine’s control panel (Additional Functions menu)
•
The Remote UI (via a web browser)
3
In
s
tall driver
s