Canon imageRUNNER 2545i, Sending And Facsimile Manual

Page: 313 / 321

Glossary 10-14
Ap
pen
dix
10
PDF (OCR)
A file format that performs OCR (Optical Character Recognition) processing on a
scanned document. This process extracts any recognizable text data, and adds it as a
transparent layer to create a PDF with searchable text. You can search the text using
Adobe Acrobat/Adobe Acrobat Reader, or your operating system’s search function.
Protocol
A set of rules that govern the transmission of data across a network. Examples of
protocols are FTP, DHCP, BOOTP, RARP and TCP/IP.
R
Re s olution
The density of dots attained by an output device, such as a fax, scanner, or printer, in
producing an image. Expressed in terms of dots per inch (dpi). Low resolution causes
font characters and graphics to have a jagged appearance. Higher resolution means
smoother curves and angles, as well as a better match to traditional typeface designs.
Resolution values are represented by horizontal data and vertical data (e.g., 600 ×
600 dpi).
Rotary Pul s e
Also called “pulse dial.” On a rotary pulse telephone, a dial is turned to send pulses to
the telephone switching system.
RX
Abbreviation for “Reception/Receiving.”
S
S cannin g Area
The area that is actually scanned is slightly smaller than the size of the original
document, so words or images near the edges of the document may not be scanned.
Therefore, you should allow some margin on all sides of the document that you are
sending.
S equential Broadca s t
Sequential Broadcasting enables you to send a scanned document to up to 532
destinations simultaneously. If you frequently send documents to the same
destinations, it is highly recommended that you register the numbers as a group in a
one-touch button for group dialing.