Canon imageRUNNER 2545i Sending And Facsimile Manual Download Page 247

Page: 247 / 321

Reception Related Items

7-34

izin

g t

he Ma

ine’

Set

Specifying the Methods for Printing Received Documents
(Paper Drawer Selection)

You can set how the machine prints documents when there is no paper matching
the size of the received document.

The four available printing methods (Switches A, B, C, and D) are described below.

■

witch A

The image is printed over two sheets of paper that have the same combined size
as the received document.

■

witch B

The image is printed with blank space on paper that has the same width as the
received document.

■

witch C

The image is reduced and printed on paper that differs in width from the received
document.

Received Data (Ori

inal)

Output

Received Data (Ori

inal)

Output

Received Data (Ori

inal)

Output

A4R

Summary of Contents for imageRUNNER 2545i


































































































































































































































































































































Search results

Summary of Contents for imageRUNNER 2545i

Reviews:

Related manuals for imageRUNNER 2545i

Brands by name

Popular brands

Canon imageRUNNER 2545i, Sending And Facsimile Manual

Search results

Summary of Contents for imageRUNNER 2545i

Reviews:

Related manuals for imageRUNNER 2545i

Brands by name

Popular brands