Canon imageRUNNER 2545i Reference Manual Download Page 154

Page: 154 / 264

Routine Cleaning

5-31

tin

e Ma

Clean the platen glass and the underside of the feeder/platen
cover with a water-moistened cloth, and then wipe them clean with
a soft, dry cloth.

IMPORTANT

Do not dampen the cloth too much, as excess water may damage the machine.

Feeder Scanning Area and Rollers

Clean the feeder scanning area and rollers regularly as described below.

IMPORTANT

Do not dampen the cloth too much, as excess water may damage the machine.

NOTE

The Feeder (DADF-AA1/-AB1) is optional for the imageRUNNER 2545/2535/2530/
2525/2520.

Open the feeder cover.

Clean the rollers (a total of three
places) inside the feeder cover
with a water-moistened cloth.
Then, wipe the area with a soft,
dry cloth.

Spin the rollers with your hand while
cleaning them.

Summary of Contents for imageRUNNER 2545i









































































































































































































































































Search results

Summary of Contents for imageRUNNER 2545i

Reviews:

Related manuals for imageRUNNER 2545i

Brands by name

Popular brands

Canon imageRUNNER 2545i, Reference Manual

Search results

Summary of Contents for imageRUNNER 2545i

Reviews:

Related manuals for imageRUNNER 2545i

Brands by name

Popular brands