Canon imageRUNNER 2545, Service Manual

Page: 168 / 362

4
4
4-60
4-60
Parts Replacement and Cleaning > PCB > Removing the Cassette Size Detection Switch (SW6/SW7) > Replacement Procedure
Parts Replacement and Cleaning > PCB > Removing the Cassette Size Detection Switch (SW6/SW7) > Replacement Procedure
7) Remove the internal cover (right upper).
- 2 screws
x2
8) Remove the front door switch.
- 2 terminals
- 1 screw
x1
F-4-139
F-4-140
Removing the Cassette Size Detection Switch (SW6/
SW7)
■ Replacement Procedure
1) Remove the cassette.
2) Remove the lower rear cover.(
“Removing the Lower Rear Cover”(page 4-22). )
3) Remove the option power supply PCB.( “Removing the Option Power Supply PCB”(page
4-45). )
4) Remove the cassette size detection assembly.
- 1 connector
- 1 screw
- 1 boss
x1
x1
NOTE:
Remove the connector and the screw from the rear, but the cassette size detection
assembly removes it from the front side.
F-4-141