Canon imageRUNNER 2545 Service Manual Download Page 132

Page: 132 / 362

4-24

Parts Replacement and Cleaning > Main Units/Parts > Removing the Right Cover Assembly

Main Units/Parts

Removing the Right Cover Assembly

1) Remove the reader right cover. (

“Removing the Reader Right Cover”(page 4-20)..

)

2) Remove the reader rear cover. (

“Removing the Reader Rear Cover”(page 4-20)..

)

3) Remove the rear right cover (upper). (

“Removing the Rear Right Cover (Upper)”(page 4-22).

)

4) Open the right cover.
5) Remove the link between the right cover and pickup unit.

F-4-45

6) Remove the belt.
• 2 screws

F-4-46

Summary of Contents for imageRUNNER 2545











































































































































































































































































































































































Search results

Summary of Contents for imageRUNNER 2545

Reviews:

Related manuals for imageRUNNER 2545

Brands by name

Popular brands

Canon imageRUNNER 2545, Service Manual

Search results

Summary of Contents for imageRUNNER 2545

Reviews:

Related manuals for imageRUNNER 2545

Brands by name

Popular brands