Canon IMAGERUNNER 2530, Service Manual Digest

Page: 77 / 110

4
4-44
#CLEAR
Configuration
Group Item Description
TEL & USER DATA Clears all user-registered and -set areas of telephone
registration data and user data.
(Telephone registration refers to the registration of
codes on one-touch dialing, abbreviated dialing, and
group dialing.)
SERVICE DATA Clears theservice data. User data is not cleared.
COUNTER Clears the maintenance counter, parts counter
and mode-specific counters. Initializes the counter
(numerator) in the system dump list.
SOFT-CNT Not used
TYPE Initializes user data and service data to suit specified
destination settings.
HST ACTIVITY Initializes the activity report
ACCOUNT Clears print histories.
JAM Clears the jam history.
ERR Clear the error (error code) history.
ALARM Clears the alarm history.
ENVIROMENT Initializes the enviroment log data.
CARD Clears department management information held in
the controller before the card reader is demounted.
ERR E719 Clears card reader errors.
PWD Clears the system administrator's password.
FILE SYSTEM Not used
FORMAT USB MEMORY Format the USB memory. (This mode is used when
the USB memory error is damaged and E744 occurs.)
LICENSE DRIVE Clears the drive for license file.
FMT-SD 512 Format the 512MB SD card.
1024 Format the 1204MB SD card.
2048 Format the 2048MB SD card.
CA-KEY Initializes an installed CA certification. (Displayed only
after activation of the e-RDS function.)
ERDS-DAT The settings related to e-RDS are cleared to the
factory settings. (Displayed only after activation of the
e-RDS function.)
DEPT_USER_CLEAR Turns off the department-based ID management and
user management functions.
SYSTEM_INFO_CLEAR Clears the system management identification number.
ENGIN ERRCLR Clears the engine errors.
BKRAMCLR Clears the engine backup RAM.
TNRINST Supplies toner from the toner cartridge to the
developing assembly.
EAM-DAT Initializes the EAM Flash/SRAM data.
■
Group Item Description
ELA-DAT Initializes the ELA Flash/SRAM data.
ALL Clears user and service data (except for some scan
parameters and print parameters), and the counter
setting/registration data in the system dump list,
except for the print count.
#DISPLAY
Configuration
An error code is displayed when a service error has occurred. The E code is displayed in the
upper step, and the detail code is displayed the bottom step.
Group Item Description
DISPLAY ERR The E code and detail code of the current system error are displayed.
(Multiple codes can be displayed with the left and right buttons. )
<Display example>
SYSTEM ERROR
xxx: Eyyy-zzzz Example) 001:E602-1105
xxx: History number
yyy: E Code
zzzz: Detail code
JAM The current JAM code is displayed.
(Multiple JAM codes can be displayed with the left and right buttons.)
<Display example>
JAM ERROR
xxx:y-z-vvvv-wwww
xxx: History number
y: Description of position (3: Main unit (including the pickup assembly), 4:
ADF, 5: Finisher)
z: Cassette level (01: Manual feed tray, 1: Cassette 1, 2: Cassette 2, 3;
Cassette 3,4: Cassette 4, 7: Double-sided)
vvvv: JAM code
wwww: paper size
SPDTYPE Display of engine speed type on controller PCB
<Display example>
SPDTYPE (Line 1)
45cpm (Line 2)
■
T-4-55 T-4-55
T-4-56 T-4-56