Canon IMAGERUNNER 2530, Service Manual Digest

Page: 59 / 110

4
4-26
Item No. Default Setting range Function
#PRINT
NUMERIC
141: 100 '-128 to 127, one
unit = 0.1 mm
Left-end registration adjustment (double-
sided large)
142: 100 '-128 to 127, one
unit = 0.1 mm
Adjustment of margin at leading edge at
normal speed (230mm/sec)
143: 100 '-128 to 127, one
unit = 0.1 mm
Adjustment of margin at leading edge at half
speed (137mm/sec)
144: 100 '-128 to 127, one
unit = 0.1 mm
Laser trail edge OFF adjustment
145: 1000 '-512 to 511 Adjustment of the magnification to write
image in main scanning direction (A-B)
146: 1000 '-512 to 511 Not used
147: 1000 '-512 to 511 Not used
148: 1000 '-512 to 511 Adjustment of the point to start writing in
main scanning direction (A-B)
149: 1000 '-512 to 511 Not used
150: 1000 '-512 to 511 Not used
151: 100 '-128 to 127 Developing bias offset for DC
152: 100 '-128 to 127 Primary charge offset for DC
153: 100 '-128 to 127 Primary charge offset for AC
154: 100 '-128 to 127, one
unit = 0.1 mm
Adjustment of the registration loop volume
(Thick paper)
155: 100 '-128 to 127, one
unit = 0.1 mm
Adjustment of the registration loop volume
(Special paper)
156: 100 '-128 to 127, one
unit = 0.1 mm
Adjustment of the registration loop volume
(Envelop cassette pickup)
157: 7 0 to 14 Pickup timing adjustment
158:-164: Not used
165: 0 0 to 3 Fixing auto cleaning frequency setting
166: 7 0 to 14 Temperature adjustment UP/DOWN mode
(Plain paper, manual feed tray)
167: 172: Not used
173: 7 0 to 14 Temperature adjustment UP/DOWN mode
(2nd page of double-sided printing)
174: 0 0 to 1 Reduction in FCOT
175:-177: Not used
178: 1 0 to 1 Not used
179: 7 0 to 14 Temperature adjustment UP/DOWN mode
(Envelop/Postcard)
180: 7 0 to 14 Temperature adjustment UP/DOWN mode
(Special mode N)
T-4-35 T-4-35
Item1 Item2 Item3 Default Setting range Function
#PRINT
CST
CAS1 CAS1-U1 0 26: OFI, 27: E-OFI, 37: M-OFI,
36: A-OFI, 24: FLSP, 25: A-FLSP,
30: A-LTRR, 42: FA4, 34: G-LGL
0: default
Cassette 1paper size
group special, standard-
size paper entry
CAS1-U2 0 32: G-LTR-R, 34: G-LGL, 23:
K-LGL-R, 0: default
CAS1-U3 0 22: K-LGL, 31: G-LTR, 29: A-LTR,
0: default
CAS1-U4 0 28: B-OFI, 0: default
CAS2 CAS2-U1 0 26: OFI, 27: E-OFI, 37: M-OFI,
36: A-OFI, 24: FLSP, 25: A-FLSP,
30: A-LTRR, 42: FA4, 34: G-LGL
0: default
Cassette 2 paper size
group special, standard-
size paper entry
CAS2-U2 0 32: G-LTR-R, 34: G-LGL, 23:
K-LGL-R, 0: default
CAS2-U3 0 22: K-LGL, 31: G-LTR, 29: A-LTR,
0: default
CAS2-U4 0 28: B-OFI, 0: default
CAS3 CAS3-U1 0 26: OFI, 27: E-OFI, 37: M-OFI,
36: A-OFI, 24: FLSP, 25: A-FLSP,
30: A-LTRR, 42: FA4, 34: G-LGL
0: default
Cassette 3paper size
group special, standard-
size paper entry
CAS3-U2 0 32: G-LTR-R, 34: G-LGL, 23:
K-LGL-R, 0: default
CAS3-U3 0 22: K-LGL, 31: G-LTR, 29: A-LTR,
0: default
CAS3-U4 0 28: B-OFI, 0: default
CAS4 CAS4-U1 0 26: OFI, 27: E-OFI, 37: M-OFI,
36: A-OFI, 24: FLSP, 25: A-FLSP,
30: A-LTRR, 42: FA4, 34: G-LGL
0: default
Cassette 4 paper size
group special, standard-
size paper entry
CAS4-U2 0 32: G-LTR-R, 34: G-LGL, 23:
K-LGL-R, 0: default
CAS4-U3 0 22: K-LGL, 31: G-LTR, 29: A-LTR,
0: default
CAS4-U4 0 28: B-OFI, 0: default
Service Soft Switch Settings (PRINTER)
SSSW-SW14
List of Functions
Bit Function 1 0
0 Transfer bias pressure reduction mode Enable Disable
1 not used
- -
2 Black belt addition mode Enable Disable
3 Post-rotation reduction mode Enable Disable
4 Flicker reduction mode Enable Disable
■
●
T-4-36 T-4-36