manualshive.com logo in svg

Canon imageRUNNER 2520 Series, Service Manual, Page: 205 / 402

Share
Download
Canon imageRUNNER 2520 Series Service Manual Download Page 205

 Procedure

NOTE:

The following describes the procedure to upgrade Boot as an example: For upgrading the other firmware, follow the same
procedure as Boot.

CAUTION:

When upgrading the system software of Boot and Bootable lang, be sure to first upgrade Boot.

1. Turn ON the Power Switch of the PC and start UST.
2. When turning On the Power Switch, a wizard is displayed to add a new hardware, and click "Cancel".

3. Enter service mode.
4. Press the arrow key and select "DOWNLOAD", and then press the OK key.

NOTE:

Download Mode is also available from the following user mode:

> System Settings > Update Firmware > Yes

5. Start UST once "USB DOWNLOAD AVAILABLE" is displayed.
6. Following the instruction on the screen, select "Next".

6. Troubleshooting

195

Summary of Contents for imageRUNNER 2520 Series



















































































































































































































































































































































































































Reviews:

No comments