Replacing the Toner
3-10
Rout
ine
Main
te
nan
ce
3
Replacing the Toner
When there is only a small amount of toner remaining in the machine, the following
message blinks on the LCD display. You may continue printing, however, it is highly
recommended that you prepare a new toner cartridge before the toner has
completely run out.
When prints can no longer be made as toner runs out completely, the following
display appears on the LCD display. Follow the procedure described below to help
you replace the toner cartridge.
NOTE
For detailed information on the displays showing the instructions on replacing the toner
or staples, clearing the paper or staple jams, see Chapter 7, “Troubleshooting,” in the
Reference Guide
.
WARNING
•
Do not burn or throw used toner cartridges into open flames, as this may cause
the toner remaining inside the cartridges to ignite, resulting in burns or a fire.
•
Do not store toner cartridges or paper in places exposed to open flames, as this
may cause the toner or paper to ignite, resulting in burns or a fire.
Density: Auto
ImgQual.: Text
2-Sided: Off
Prepare new toner
Toner low
When is shown
press [ ] to
display steps
Out of toner
