Canon imageRUNNER 2320, Reference Manual

Page: 181 / 292

Feeder (DADF-P2) 5-5
Op
ti
ona
l Eq
uipm
ent
5
Feeder (DADF-P2)
Originals placed in the feeder are automatically fed sheet by sheet to the scanning
area. The feeder also automatically turns over two-sided originals to make one- or
two-sided copies.
CAUTION
Do not insert your fingers into the gaps around the original supply tray, as your
fingers may get caught. Also, be careful not to drop objects, such as paper clips
into the gaps, as doing so may cause damage to the machine or cause it to
break down.
IMPORTANT
•
When using the platen glass to copy or scan thick originals, such as books or magazines,
do not press down hard on the feeder.
•
Do not place any objects in the original output area. If the original output area is blocked,
originals may get damaged, and printing may not be performed correctly.
a Feeder Cover
Open this cover to remove jammed originals.
b
Slide Guides
Adjust the slide guides to match the width of the
originals.
c Original Supply Tray
Originals placed here are automatically fed sheet
by sheet to the scanning area. Place originals into
this tray with the surface that you want to scan
face up.
d Original Output Area
Originals that have been scanned from the
original supply tray are output to the original
output area in the order that they are fed into the
feeder.