Canon imageRUNNER 2320, Reference Manual

Page: 170 / 292

Remote UI 4-32
Syst
em
Ma
na
ger
Se
tt
in
gs
4
Remote UI
If the network connection is available, you can set whether to enable the Remote UI
(User Interface) to operate the machine and change settings via the network.
Once the Ethernet interface port is configured properly, the machine can be
controlled and set up through the Remote UI.
IMPORTANT
The Remote UI is available only when the optional Network Kit is attached to the
machine.
NOTE
•
For more information on the Remote UI, see the Remote UI Guide .
•
For instructions on configuring the Ethernet port, see the Network Guide .
•
The default setting is ‘On’.
1
Press (Additional Functions).
The Additional Functions menu appears.
2
Use [ ] or [ ] to select <System
Settings>
➞
press [OK].
If the System Manager ID and System
Password have already been set, enter the
System Manager ID and System Password
using
- (numeric keys)
➞
press
(ID).
The System Settings menu appears.
3
Use [ ] or [ ] to select <Remote
UI On/Off>
➞
press [OK].
The Remote UI On/Off menu appears.
Timer Settings
Adjustment/Cleaning
Report Settings
System Settings
Additional Functions
Dept. ID Management
User ID Management
Network Settings
Remote UI On/Off
System Settings